Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Tenleytown?
Spring replacement in Tenleytown typically costs $180 – $340 for a single spring, and most doors need a matched pair replaced together, which usually runs about twice that range. The exact price depends on spring type, door weight, and how accessible the torsion assembly is once we’re on site. A snapped spring leaves the door unusable and unsafe to lift, so the fastest path is a diagnosis and a written estimate, not a guess over the phone.
We’re a focused garage door specialist, not a general home-services operation. That matters for spring work because torsion and extension springs are the highest-risk repair on any door. Both store enormous tension, and a spring that lets go without the right tools can cause serious injury. Our technicians have up to 13 years of experience with exactly this kind of system, and every visit starts with a full assessment of the springs, cables, drums, and center bearing before anything is quoted. Call (855) 658-4168. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Single spring replacement in Tenleytown: typically $180 – $340.
- Matched pair (the common case): about twice that, since both springs are replaced together.
- Cable, roller, or track damage found during the job adds to the total, quoted separately.
- The written estimate sets the final price. Estimates are free.
- Same-day service is often possible when you call early.
Spring Replacement Cost Breakdown (2026)
Here’s how spring-related work typically breaks down in the Tenleytown market. These are estimated ranges for the labor and parts involved, not fixed prices. Every door is quoted individually, and the written estimate is what you pay.
| Service | Typical Estimated Range | Notes |
|---|---|---|
| Spring repair (one spring) | $180 – $340 | Torsion or extension, single spring |
| Matched spring pair | About twice the single-spring range | Both springs replaced together, the standard practice |
| Cable repair | $130 – $250 | Often needed when a spring fails and slackens the cables |
| Roller replacement | $110 – $220 | Worn or bent rollers found during service |
| Track realignment | $120 – $240 | For doors knocked off track or binding |
| Panel replacement | $250 – $500 | If a failed spring dropped the door hard enough to dent a section |
| Opener repair | $120 – $320 | Separate from spring work, quoted on its own |
| Opener installation | $250 – $550 | New opener, separate job |
| General garage door repair | $150 – $600 | Broader repairs not limited to springs |
| New door installation | $700 – $2,200 | When the door itself is beyond economical repair |
What pushes a spring job toward the top of the range? Heavier doors, double doors with thicker insulation, and doors where the torsion bar sits close to a low ceiling all take more time and sometimes different hardware. What keeps it lower? A straightforward single-spring replacement on a standard door with clear access, done in one visit. When the technician finds a worn cable or a bent roller while the springs are off, that gets quoted before we touch it, so there are no surprises at the end. We work on all major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so the diagnosis isn’t biased toward a single manufacturer’s parts.
If you’re weighing spring work against broader repairs, our garage door repair Tenleytown page lays out the full service picture, and our spring replacement page covers the process itself.
What Affects Spring Replacement Pricing in Tenleytown
Tenleytown’s housing stock shapes spring costs in ways that a generic price list won’t capture. Many homes here are older brick construction with attached garages on grade or just below it, and decades of settling can shift the door frame and track slightly out of true. That matters because a spring replacement done without checking the track and hinges will wear the new springs faster. The technician’s job is to notice that before the door is cycled.
- Spring type and door weight. Torsion springs mounted on a horizontal bar above the door are the most common setup in Tenleytown’s single-family and rowhouse garages. Extension springs, which run along the tracks, are found on older doors. Each uses different hardware and different tension requirements, and heavier doors need higher-rated springs that cost more.
- Single spring vs. matched pair. A well-maintained door with one spring failure often gets both replaced as a pair, because the surviving spring has absorbed the same cycles and is likely close to failing too. That’s roughly double the single-spring range. Ask the technician to explain the reasoning for your door specifically before committing.
- Access to the torsion assembly. Low garage ceilings, tight side clearances, and doors installed close to stored items or ductwork add time. Tenleytown garages in older homes often have less headroom than modern builds, and winding springs in a tight space takes patience and the right tools.
- Condition of linked parts. Cables, drums, center bearings, and hinges all interact with the springs. If the cables are frayed or the bearing is dry and grinding, replacing springs without addressing those parts shortens the life of the new springs. Each add-on is quoted individually.
- Door age and overall condition. When a failed spring has let the door drop or rack unevenly, panels and tracks can take a hit. A dented bottom section or a bent track changes the scope of the job.
- Brand and parts availability. Doors made by Clopay, Amarr, Wayne Dalton, and Raynor sometimes call for specific spring wire sizes to match the original balance. Getting the right spring matters more than getting a spring fast. Our technicians are trained across eight leading manufacturers, so they can identify your door’s system and match the hardware without trial and error.
The DC-area climate also plays a smaller but real role. Hot summers and cold winters mean the springs cycle through temperature swings that can fatigue metal over time, and doors that sit in full summer sun age faster on the sunny side. That’s one reason spring failures tend to cluster in seasonal transitions rather than spread out evenly across the year.
How to Save on Spring Replacement
There’s no secret discount to hunt for. The savings come from being deliberate about when and how the work gets done.
- Get the estimate in writing before work starts. A free written estimate gives you a number to compare and eliminates the chance of an on-the-spot upsell. Call (855) 658-4168 for a free estimate, and the technician will quote the job in full before touching anything.
- Replace the pair, not just the broken one. It sounds like spending more up front, but replacing one spring on a door whose other spring is equally worn usually means a second service call within a year. Two visits rarely cost less than one pair replacement.
- Ask about cables and rollers while the door is open. If the technician is already on site with the springs off, worn cables and rollers can be replaced at the same time without a second visit. That keeps total cost lower than two separate jobs.
- Don’t let a small issue become a big one. A door that’s been slow, jerky, or noisy for months is telling you something. Catching a worn spring before it fails avoids the panel and track damage that a hard drop can cause.
- Address opener problems separately. Opener repair is a different job with its own range ($120 – $320). If the opener is also struggling, ask for it to be quoted separately so you can decide what to do now and what can wait.
We always start with a diagnosis, not a pitch. Our technicians are trained across competing manufacturer platforms, so the recommendation is based on what your door needs, not what’s easiest to sell. If a spring replacement is genuinely all that’s required, that’s what we’ll quote.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Tenleytown?
Spring replacement in Tenleytown typically costs $180 – $340 for one spring, and a matched pair usually runs about twice that. The written estimate sets the final price. Call (855) 658-4168 for a free estimate.
Can you replace a broken spring the same day?
Same-day service is often available when you call early, and emergency service is genuinely part of what we offer. A broken spring means the door can’t be safely operated, and it’s a security concern for the home, so we treat it as urgent. Call (855) 658-4168. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Is it cheaper to repair or replace a garage door with a broken spring?
Repair is almost always the answer: spring replacement at $180 – $340 per spring falls well below the $700 – $2,200 range for a new door. A new door only makes sense when the panels, frame, or tracks are also failing beyond repair. Call (855) 658-4168 for a free estimate and a straight answer on which path fits your door.
Why do both springs need replacing at the same time?
Because both springs on a door have cycled the same number of times. If one has failed, the other is close behind, and replacing just one often leads to a second service call within a year. Pair replacement avoids that, even though it costs about twice the single-spring range. Call (855) 658-4168 for a free estimate.
Does a spring replacement include new cables and rollers?
Not always. Cables ($130 – $250) and rollers ($110 – $220) are quoted separately if the technician finds them worn during the inspection. Catching them in the same visit is often cheaper than scheduling a second call. Call (855) 658-4168 for a free estimate.
Can I fix a broken spring myself?
No. Torsion and extension springs are under extreme tension, and a spring that releases unexpectedly can cause severe injury even to someone who’s watched a video. This is the most dangerous repair on a garage door, and it requires calibrated winding bars and trained hands. That’s exactly the kind of work we’re here for. Call (855) 658-4168 for a free estimate. Estimates are free, and the written quote is the price.
What brands do you service?
We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That cross-brand training matters for spring work because the correct spring wire size depends on the door’s original design, not on what’s easiest to source. Call (855) 658-4168 for a free estimate.
Whether the door has failed completely or the springs are simply due, the next step is a call. We’ll diagnose the system, quote the job in writing before any work begins, and use the correct hardware for your specific door. Call (855) 658-4168. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. No job too routine, no failure too urgent.
Written by the team at Garage Door Repair Tenleytown.
Pricing reflects the Tenleytown market as of 2026. Garage Door Repair Tenleytown offers free estimates. Call (855) 658-4168.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Brianna Coleman"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Erin Quinn"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Jennifer Kowalski